Rubber Concrete Stone Molds Manufacturers & Suppliers

Begin Your Journey with Our Concrete Stone Molds

How to install rubber stone molds

• The surface where the rubber molds will be installed should be clean and free of debris. If there are any cracks or holes in the surface, they should be filled and leveled.
• A primer should be applied to the surface to ensure good adhesion of the rubber molds. Follow the manufacturer's instructions for the specific primer being used.
• The rubber stone mixture is typically a two-part mixture that needs to be thoroughly mixed before application. Follow the manufacturer's instructions for mixing the rubber stone mixture.
• Pour the rubber stone mixture onto the surface and spread it evenly using a trowel or squeegee. Make sure the rubber stone mixture is spread evenly and level.
• Once the rubber stone mixture has been applied, place the rubber molds onto the surface. Make sure they are aligned and spaced evenly.
• Apply pressure to the rubber molds to ensure good adhesion to the rubber stone mixture. A roller or tamper can be used to apply pressure.
• Allow the rubber stone mixture to dry completely before walking or driving on it. Observe the manufacturer's pedagogy for the drying period.
• Once the rubber stone mixture has dried, remove the rubber molds from the surface. Use a putty knife or pry bar to remove them gently.
• Once the rubber molds have been removed, apply a sealer to the surface to protect it from water and UV rays.

Follow the manufacturer's pedagogy for the precise sealer being used.

Why Choose Our Rubber Silicone Molds?

• Our molds are made from top-quality rubber silicone material, ensuring durability and longevity.
• We offer an extensive range of molds for stone cladding, including various sizes and patterns to choose from.
• Our molds are easy to use and require minimal maintenance, making them ideal for both professionals and DIY enthusiasts.
• Our molds offer great value for money, as they can be used multiple times and are designed to last for a long time.

Creating Stone Cladding with Rubber Silicone Molds

• Browse our range of concrete stone molds and select the ones that best fit your design requirements.
• Mix the concrete according to the instructions provided, and pour it into the molds.
• Leave the concrete to set for a few hours, or until it has hardened.
• Carefully remove the molds from the concrete, and your beautiful stone cladding is ready!

Cost of creating stone cladding

• Larger and more intricate molds will require more material and time to create, and will therefore be more expensive.
• There are different types of silicone available, with varying degrees of hardness, durability, and heat resistance. The cost of the silicone will depend on the specific type chosen.
• The cost per mold will typically decrease as the quantity ordered increases.
• The cost of labor to create the molds will depend on the skill level and experience of the mold maker.
• If the molds need to be shipped to a location, there may be additional costs associated with shipping and handling.